PC industrijska omara

19" accessories

Download Network and Server Catalogue (slo/eng) >> (11Mb) katalog server omare
Power distributor 19" 230V 9V 1,5HE Distributor with 9 socket and 2,5 m conection cable
  • Material: extruded aluminium, plastic parts polyamide
  • Colour: silver, black plastics
  • Socket rotation: 450
  • Load rating: max 250VAC/16A
    Two screws with cage nuts supplied.
    • Power distributor 19" 230V 9V 1HE
    Distributor with 9 socket and 2,5 m conection cable
  • Material: steel sheet
  • Socket rotation: 450
  • Colour: black
  • Load rating: max 250VAC/16A
    Two screws with cage nuts supplied.
    • Power distributor 19" 230V 9V 1HE PVC
    Distributor with 9 socket and 2,5 m conection cable
  • Material: polyamide
  • Colour: black
  • Socket rotation: 450
  • Load rating: max 250VAC/16A
    Two screws with cage nuts supplied.
    • Power distributor 19" 230V 7V 1HE
    protector
    Distributor with 9 socket and 2,5 m conection cable
  • Max.protection : 15 kA
  • Reaction time: 5 ns
  • Material: steel sheet, powder coated
  • Colour: black
    Two screws with cage nuts supplied.
    • Vent unit XTS 2V
    For enclosures type server, maxi and tehno. Two fans with ball bearing
  • Power: 220/240VAC 2x14/17 W,
  • air flow 2x 80/90 m3 / h,
  • Noise: 39 / 43 dBA
  • Life span: 50000 h
  • Material: steel sheet
  • Colour: light grey / RAL 9002
    • Digital thermostat with sensor
    For 19'' system mounting
    Thermostat Dixell
    Startup setting: + 10 0C to + 60 0C
    Startup sensitivity: step by 0,1 0C
  • Material: steel sheet
    Colour: light grey / RAL 9002
    Two screws with cage nuts supplied.
    • Thermostat BImetal

    Thermostat for vent unit on/off
    Startup setting: + 0 0C do + 60 0C
    Startup sensitivity: +/- 4 0C
    Temperatur diference <70C
    Max: 2A 240VAC
    Blanking panel 1 HE, 2 HE, 3 HE, 4 HE
    For 19" mounting
    Material: steel sheet
    Colour: light grey / RAL 9002
    Two screws with cage nuts supplied.
    Cable routing 1 HE typ K
    Cable routing 2 HE typ K
     For orderly cable routing
    Material: steel sheet
    Colour: light grey / RAL 9002
    Two screws with cage nuts supplied.
    Cable routing 1HE tip Z
     For orderly cable routing
    Material: alu sheet
    Colour: Aluminium, cable clamps zinc pasivated
    Two screws with cage nuts supplied.
    Shelf load rating up to 300N static
    Shelf load rating up to 1200N static

    For 19" mounting
    Colour: light grey / RAL 9002
    Shelf 19" 2HE load rating up to 300N static


    For 19" mounting
    Depth: 200, 300, 400mm
    Colour: light grey / RAL 9002
    Full pull out shelf load rating up to do 300N static
    Full pull out shelf load rating up to 1200N
    For 19" mounting
    Colour: light grey / RAL 9002
    Mobile plinth XTS
     Mobile plinth for enclosures typ S, X and T, load rate 3500 N static.
    Mobile plinth M
     Mobile plinth for enclosures typ S, X and T, load rate 1500 N static.
    Regulating leg
    For easy adjustment to uneven surfaces. There are four regulating feet in the set. Adjusted for cabinet types S, X, T and M. WARNING: Subsequent building-in of the regulating feet is not intended.
    Nut M6 in cage with screew
    Cabinet connector
    The cabinet connector is meant for connecting cabinets placed in a series.
    Steel sheet extrusion XT
    Steel sheet extrusion S
    For front and rear instalation in the rack
    Vertical cable router 100 x 10 mm
    Cable clamp typ S
    Cable clamp typ X70
    Cable clamp typ X80

    For vertical cable management.

    Contact us

     O.D.M. d.o.o., Ljubljana
    Pot k sejmišču 30
    1231 Ljubljana

    Tel.: +386 1 530 42 70
    Fax.: +386 1 530 42 77
    E-mail: info@odm-inz.si